PRODDUCTS
Shenzhen JHA Technology Co., Ltd is one of the leading manufacturers of hardened Ethernet, PoE, and fiber connectivity products specifically designed for harsh and demanding environments.
PRODUCTS
155M Single Mode 120Km DDM | Single Fiber SFP Transceiver JHA520CD-54
-
- Up to 155Mb/s Data Links
- Hot-Pluggable
- Duplex LC connector
- Up to 120Km on 9/125μm SMF
- 1550nm DFB laser transmitter
- 1490nm PIN photo-detector
- Single +3.3V Power Supply
- Monitoring Interface Compliant with SFF-8472
- Maximum Power <1W
- Industrial /Extended/ Commercial operating temperature range: -40°C to 85°C/-5°C to 85°C/-0°C to 70°C Version available
Classification
155M Single Fiber
SFP Module
155M SFP
- DESCRIPTION
- DIMENSION
- ORDER INFORMATION
- DOWNLOAD
- APPLICATIONS
-
Product Introduction:
The “155M Single Mode 120Km DDM | Single Fiber SFP Transceiver JHA520CD-54” is a prime example of the high-quality yet Low price Single Fiber SFP Transceiver products available in the market. Designed to offer reliable data transmission at speeds up to 155Mb/s, this transceiver is an ideal solution for cost-effective network expansion. With its hot-pluggable feature and duplex LC connector, the JHA520CD-54 ensures easy installation and compatibility with various network devices. It can support transmission distances up to 120Km on 9/125μm single-mode fiber, making it a robust choice for long-range communication needs. The use of a 1550nm DFB laser transmitter and a 1490nm PIN photo-detector, along with a single +3.3V power supply, highlights the energy-efficient design of these Low price Single Fiber SFP Transceiver products.
Moreover, the JHA520CD-54 is equipped with a monitoring interface compliant with SFF-8472, which enhances its manageability and allows for effective monitoring of critical parameters. With a maximum power consumption of less than 1W, this transceiver is designed to be environmentally friendly and reduce operational costs. Available in industrial, extended, and commercial operating temperature ranges, these Low price Single Fiber SFP Transceiver products are built to perform reliably in a wide range of environments.
Applications:
* 1000Base-EZX Ethernet
* Metro/Access Networks
* 1×Fibre Channel
* Other Optical Links
Description:
JHA520CD-54 Transceivers are a high performance, cost effective module which have a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 31dB link budge ensure this module 1000Base-EZX Ethernet 120km application.
Absolute Maximum Ratings
Parameter
Symbol Min. Typical Max. Unit Storage Temperature TS
-40
+85
°C
Supply Voltage VCC
-0.5
4
V
Relative Humidity RH
0
85
%
Recommended Operating Enviorment:
Parameter
Symbol Min. Typical Max. Unit Case operating Temperature Industrial TC
-40
85
°C
Extended -5
85
°C
Commercial 0
+70
°C
Supply Voltage VCC
3.135
3.465
V
Supply Current Icc
300
mA
Inrush Current Isurge
Icc+30
mA
Maximum Power Pmax
1
W
Electrical Characteristics (TOP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts)
Parameter
Symbol Min. Typical Max. Unit Note Transmitter Section: Input differential impedance Rin
90
100
110
W
1
Single ended data input swing Vin PP
250
1200
mVp-p
Transmit Disable Voltage VD
Vcc – 1.3
Vcc
V
2
Transmit Enable Voltage VEN
Vee
Vee+ 0.8
V
Transmit Disable Assert Time Tdessert
10
us
Receiver Section: Single ended data output swing Vout,pp
300
800
mv
3
Data output rise time tr
500
ps
4
Data output fall time tf
500
ps
4
LOS Fault Vlosfault
Vcc – 0.5
VCC_host
V
5
LOS Normal Vlos norm
Vee
Vee+0.5
V
5
Power Supply Rejection PSR
100
mVpp
6
Note:
- AC coupled.
- Or open circuit.
- Into 100 ohm differential termination.
- 20 – 80 %
- LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
- All transceiver specifications are compliant with a power supply sinusoidal modulation of 20 Hz to 1.5MHz up to specified value applied through the power supply filtering network shown on page 23 of the Small Form-factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 14, 2000.
Optical Parameters(TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)
Parameter
Symbol Min. Typical Max. Unit Note Transmitter Section: Center Wavelength λc
1530
1550
1570
nm
Spectral Width σ
1
nm
Optical Output Power Pout
0
+5
dBm
1
Optical Rise/Fall Time tr / tf
500
ps
2
Extinction Ratio ER
10
dB
Generated Jitter (peak to peak) JTXp-p
0.07
UI
3
Generated Jitter (rms) JTXrms
0.07
UI
3
Eye Mask for Optical Output Compliant with G.957(class 1 laser safety) Receiver Section: Optical Input Wavelength λc
1260
1600
nm
Receiver Overload Pol
-8
dBm
4
RX Sensitivity Sen
-34
dBm
4
RX_LOS Assert LOS A
-48
dBm
RX_LOS De-assert LOS D
-38
dBm
RX_LOS Hysteresis LOS H
0.5
dB
General Specifications: Data Rate BR
155
Mb/s
Bit Error Rate BER
10-12
Max. Supported Link Length on 9/125μm SMF@155Mb/s LMAX
80
km
Total System Budget LB
29
dB
Note:
- The optical power is launched into SMF.
- 20-80%.
- Jitter measurements taken using Agilent OMNIBERT 718 in accordance with GR-253.
- Measured with PRBS 27-1 at 10-12 BER
Pin Assignment
Diagram of Host Board Connector Block Pin Numbers and Name
Pin Function Definitions
Pin No
Name
Function
Plug Seq
Notes
1 VeeT Transmitter Ground 1 1 2 TX Fault Transmitter Fault Indication 3 3 TX Disable Transmitter Disable 3 2 4 MOD-DEF2 Module Definition 2 3 5 MOD-DEF1 Module Definition 1 3 3 6 MOD-DEF0 Module Definition 0 3 3 7 Rate Select Not Connected 3 4 8 LOS Loss of Signal 3 5 9 VeeR Receiver Ground 1 1 10 VeeR Receiver Ground 1 1 11 VeeR Receiver Ground 1 12 RD- Inv. Received Data Out 3 6 13 RD+ Received Data Out 3 6 14 VeeR Receiver Ground 3 1 15 VccR Receiver Power 2 1 16 VccT Transmitter Power 2 17 VeeT Transmitter Ground 1 18 TD+ Transmit Data In 3 6 19 TD- Inv. Transmit In 3 6 20 VeeT Transmitter Ground 1 Note:
- Circuit ground is internally isolated from chassis ground.
- Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
- Should be pulled up with 4.7k – 10 kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
- Rate select is not used
- LOS is open collector output. Should be pulled up with 4.7k – 10 kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
- AC Coupled
SFP Module EEPROM Information and Management
The SFP modules implement the 2-wire serial communication protocol as defined in the SFP -8472. The serial ID information of the SFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C interface at address A0h and A2h. The memory is mapped in Table 1. Detailed ID information (A0h) is listed in Table 2. And the DDM specification at address A2h. For more details of the memory map and byte definitions, please refer to the SFF-8472, “Digital Diagnostic Monitoring Interface for Optical Transceivers”. The DDM parameters have been internally calibrated.
Table 1. Digital Diagnostic Memory Map (Specific Data Field Descriptions)
Table 2 - EEPROM Serial ID Memory Contents (A0h)
Data Address
Length
(Byte)
Name of
Length
Description and Contents
Base ID Fields 0
1
Identifier
Type of Serial transceiver (03h=SFP) 1
1
Reserved
Extended identifier of type serial transceiver (04h) 2
1
Connector
Code of optical connector type (07=LC) 3-10
8
Transceiver
11
1
Encoding
NRZ(03h) 12
1
BR, Nominal
Nominal baud rate, unit of 100Mbps 13-14
2
Reserved
(0000h) 15
1
Length(9um)
Link length supported for 9/125um fiber, units of 100m 16
1
Length(50um)
Link length supported for 50/125um fiber, units of 10m 17
1
Length(62.5um)
Link length supported for 62.5/125um fiber, units of 10m 18
1
Length(Copper)
Link length supported for copper, units of meters 19
1
Reserved
20-35
16
Vendor Name
SFP vendor name: JHA 36
1
Reserved
37-39
3
Vendor OUI
SFP transceiver vendor OUI ID 40-55
16
Vendor PN
Part Number: “JHA320CD” (ASCII) 56-59
4
Vendor rev
Revision level for part number 60-62
3
Reserved
63
1
CCID
Least significant byte of sum of data in address 0-62 Extended ID Fields 64-65
2
Option
Indicates which optical SFP signals are implemented(001Ah = LOS, TX_FAULT, TX_DISABLE all supported) 66
1
BR, max
Upper bit rate margin, units of % 67
1
BR, min
Lower bit rate margin, units of % 68-83
16
Vendor SN
Serial number (ASCII) 84-91
8
Date code
JHA’s Manufacturing date code 92-94
3
Reserved
95
1
CCEX
Check code for the extended ID Fields (addresses 64 to 94) Vendor Specific ID Fields 96-127
32
Readable
JHA specific date, read only 128-255
128
Reserved
Reserved for SFF-8079 Digital Diagnostic Monitor Characteristics
Data Address
Parameter
Accuracy
Unit
96-97 Transceiver Internal Temperature ±3.0 °C 98-99 VCC3 Internal Supply Voltage ±3.0 % 100-101 Laser Bias Current ±10 % 102-103 Tx Output Power ±3.0 dB 104-105 Rx Input Power ±3.0 dB Regulatory Compliance
The JHA520CD-5 complies with international Electromagnetic Compatibility (EMC) and international safety requirements and standards (see details in Table following).
Electrostatic Discharge(ESD) to the Electrical Pins MIL-STD-883EMethod 3015.7 Class 1(>1000 V) Electrostatic Discharge (ESD)to the Duplex LC Receptacle IEC 61000-4-2GR-1089-CORE Compatible with standards ElectromagneticInterference (EMI) FCC Part 15 Class BEN55022 Class B (CISPR 22B)VCCI Class B Compatible with standards Laser Eye Safety FDA 21CFR 1040.10 and 1040.11EN60950, EN (IEC) 60825-1,2 Compatible with Class 1 laserproduct. Recommended Circuit
SFP Host Recommended Circuit
Mechanical Dimensions
JHA reserves the right to make changes to the products or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such products or information.Published by Shenzhen JHA Technology Co., Ltd.
Copyright © JHA
All Rights Reserved
next page
next page
*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible
If you need to inquire about our products or price list, please leave
your email to us We will contact you within 24 hours.
Contacts
3rd Floor, No. 5 Building, Lian Jian Industrial Park, Shang Heng Lang, Long Hua New District, Shenzhen, China
0755-81 483343
amy@jha-tech.com
7 Days a week from 09:00 am to 6:00 pm
Copyright © 2022 Shenzhen JHA Technology Co., Ltd All Right Reserved
Seo Tag 粤ICP备19135367号 Powered by www.300.cn