PRODDUCTS

Shenzhen JHA Technology Co., Ltd is one of the leading manufacturers of hardened Ethernet, PoE, and fiber connectivity products specifically designed for harsh and demanding environments.

PRODUCTS

图片名称
+
  • 1(19).jpg

4*10/100M Ethernet interface+1 EPON interface, EPON ONU without Wifi Function JHA700-E104


    • Support port-based rate limitation and bandwidth control;
    • In compliant with IEEE802.3ah Standard
    • Up to 20KM transmission Distance
    • Support data encryption, group broadcasting, port Vlan separation ,etc.
    • Support Dynamic Bandwidth Allocation (DBA)
    • Support ONU auto-discovery/Link detection/remote upgrade of software;
    • Support port mode of VLAN configuration
    • Support power-off alarm function ,easy for link problem detection
    • Support broadcasting storm resistance function
    • Support port isolation between different ports
  • Ordering Information

    Product Name

    Product Model

    Descriptions

    4FE

    JHA700-E104F-HR220

    4*10/100M Ethernet interface, 1 EPON interface, plastic casing, external power supply adapter
    4GE JHA700-E104G-HR220 4*10/100/1000M Ethernet interface, 1 EPON interface, plastic casing, external power supply adapter
  • Network application

    Typical Solution:FTTH, FTTO

    Typical Business:INTERNET, IPTV 

    Figure: JHA700-E104(not include wifi) series Application Diagram

Classification

Passive products

FTTH

EPON Series


  • DESCRIPTION
  • DIMENSION
  • ORDER INFORMATION
  • DOWNLOAD
  • APPLICATIONS
  • Brief Views

    JHA700-E104 series is JHA’s for broadband access market based on the introduction of EPON technology passive optical network terminal products. It’s with EPON OLT are used together to provide a complete broadband access solution.

    EPON technology is a kind of emerging technology which takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements.

    JHA700-E104 series fully meet IEE802.3ah and CTC3.0 standard protocol. It has good third-party compatibility to work with the third party OLT, It supports 1Gbps transmission rate up and down and provides users with good QOS, flexible bandwidth allocation of Ethernet services and IP integrated service.

     

     Functional Feature

    ♦ Support port flow control

    ♦ Support ACL to configure data packet filter flexibly

    ♦ Specialized design for system breakdown prevention to maintain stable system

    ♦ Support software online upgrading

    ♦ EMS network management based on SNMP ,convenient for maintenance  

     

    Product interface and LED definitions

    Indicator

    Description

    1

    PWR

    Power status

    On: The ONU is power on;Off: The ONU is Power off;

    2

    PON

    ONU Register

    On: Success to register to OLTBlinking: In process of registering to OLT;Off: In process of registering to OLT;

    3

    LOS

    EPON optical signals

    On: Optical power lower than receiver sensitivity ;Off: Optical in normal

    4

    LAN1-4

    LAN Port status

    On: Ethernet connection is normal;Blinking: Data is being transmitted through the Ethernet port;Off: Ethernet connection is not set up;

     

     Specification

    Item

    Parameter

    PON Interface 1 EPON optical interface
    Meet 1000BASE-PX20+ standard
    Symmetric 1.25Gbps upstream/downstream
    SC/UPC single-mode fiber
    split ratio: 1:64
    Transmission distance 20KM
    User Ethernet
    Interface
    4*10/100M or 4*10/100/1000M auto-negotiationFull/half duplex mode
    RJ45 connector
    Auto MDI/MDI-X
    100m distance
    Power Interface An external 12V DC 0.5A power supply adapter
    PONOpticalParameter Wavelength: Tx 1310nm, Rx1490nm
    Tx Optical Power: 0~4dBm
    Rx Sensitivity: -27dBm
    Saturation Optical Power: -3dBm
    Data Transmission
    Parameter
    PON Throughput: Downstream 980Mbps; Upstream 950Mbps
    Ethernet: 100Mbps or 1000Mbps
    Packet Loss Ratio: <1*10E-12
    latency: <1.5ms
    Business
    Capability
    Layer 2 wire speed switchingSupport VLAN TAG/UNTAG,VLAN translationSupport Port-based speed limitation

     

    Support Priority classification

    Support storm control of broadcast

    Support loop detection

    Network
    Management
    Support IEEE802.3 QAM, ONU can be remotely managed by OLTSupport EMS management through OLT and TelnetLocal management
    Management
    Function
    Status monitor, Configuration management, Alarm management,
    Log management
    Shell Plastic casing
    Power 4FE:                <3W, 12V/0.5A power supply adapter4GE:               <4W, 12V/0.5A power supply adapter
    Physical
    Specifications
    Item Dimension:160mm(L) x 120mm(W) x 32.5mm (H)Item weight:0.2kg
    Environmental
    Specifications
    Operating temperature: 0 to 50℃
    Storage temperature: -40 to 85℃
    Operating humidity: 10% to 90%(Non-condensing)
    Storage humidity: 10% to 90%(Non-condensing)

     

     


  • Ordering Information

    Product Name

    Product Model

    Descriptions

    4FE

    JHA700-E104F-HR220

    4*10/100M Ethernet interface, 1 EPON interface, plastic casing, external power supply adapter
    4GE JHA700-E104G-HR220 4*10/100/1000M Ethernet interface, 1 EPON interface, plastic casing, external power supply adapter
  • Network application

    Typical Solution:FTTH, FTTO

    Typical Business:INTERNET, IPTV 

    Figure: JHA700-E104(not include wifi) series Application Diagram

previous page

next page

previous page

next page

Product consultation

Submit a message

*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible

Related products