PRODDUCTS

Shenzhen JHA Technology Co., Ltd is one of the leading manufacturers of hardened Ethernet, PoE, and fiber connectivity products specifically designed for harsh and demanding environments.

PRODUCTS

图片名称
+
  • abe216e7.jpg
  • 8fef203f.jpg
  • 6bea6dc4.jpg

10G SFP+ Active Optical cable JHA-SFP-10G-AOC


    • Support 10GBASE-SR/10G Fiber Channel application
    • Compliant to SFP+ Electrical MSA SFF-8431
    • Compliant to SFP+ Mechanical MSA SFF-8432
    • Multi rate of up to 11.3Gbps
    • Transmission distance up to 300m
    • +3.3V single power supply
    • Low power consumption
    • Operating case temp Commercial: 0°C to +70 °C
    • RoHS compliant
    • Password protection for A0h and A2h
  •  

    ◊ 10GBASE-SR at 10.31Gbps

    ◊ InfiniBand QDR, SDR, DDR

    ◊ Other optical links

Classification

Network Cabling

AOC(Active Optical Cable)


  • DESCRIPTION
  • DIMENSION
  • ORDER INFORMATION
  • DOWNLOAD
  • APPLICATIONS
  • Specification:

    Absolute Maximum Ratings

    Table1- Absolute Maximum Ratings

    Parameter Symbol

    Min.

    Typical Max. Unit Notes
    Supply Voltage Vcc3

    -0.5

    - +3.6 V  
    Storage Temperature Ts

    -10

    - +70 °C  
    Operating Humidity RH

    +5

    - +85 % 1
    Receiver Damage Threshold P Rdmg

    +3.4

    - - dBm  

    Note1: No condensation

    Recommended Operating Conditions

    Table 2- Recommended operating Conditions

    Parameter Symbol Min. Typical

    Max.

    Unit Notes
    Operating Case Temperature TC 0 -

    +70

    °C  
    Power Supply Voltage Vcc 3.14 3.3

    3.47

    V  
    Power Supply Current Icc - -

    150

    mA  
    Power Dissipation Pd - -

    0.6

    W  
    Bit Rate BR - 10.3125 - Gbps  
    Fiber Bend Radius Rb 3 - - cm  

    Electrical Characteristics

    Table 3- Electrical Characteristics

    Parameter Symbol Min. Typ.

    Max.

    Units Notes

                                           Transmitter

    Differential Data Input Swing Vin,P-P 200 - 1600 mVPP  
    Input Differential Impedance ZIN 90 100 110 Ω  
     Tx_Fault Normal Operation VOL 0 - 0.8 V  
    Transmitter Fault VOH 2.0 - VCC V  
     Tx_Disable Normal Operation VIL 0 - 0.8 V  
    Laser Disable VIH 2.0 - VCC+0.3 V  
    Receiver
    Differential Date Output Vout 370 -

    1600

    mV  
    Output Differential Impedance ZD 90 100

    110

    Ω  
     Rx_LOS Normal Operation VOL 0 -

    0.8

    V  
    Lose Signal VoH 2.0 -

    VCC

    V  

    Optical Characteristics

    Table 4-Optical Characteristics

    Parameter Symbol

    Unit

    Min Typ Max Notes
    Optical transmitter Characteristics
    Data Rate DR

    Gbps

    9.953 10.3125 11.3  
    Center Wavelength Range λc

    nm

    820 850 880  
    Laser Off Power Poff

    dBm

    - - -45  
    Launch Optical Power P0

    dBm

    -6.0

    -

    -

    1
    Extinction Ratio ER dB 3

    -

    -

     
    Spectral Width(RMS) RMS

    nm

    -

    -

    0.45

     
    Optical Receiver Characteristics
    Data Rate DR

    Gbps

    9.953 10.3125 11.3  
    Bit Error Rate BER

    dBm

    - - E-12 2
    Overload Input Optical PIN

    dBm

    2.4 - - 2
    Power            
    Center Wavelength Range λc

    nm

    820

    -

    880  
    Receiver Sensitivity inAverage Power

    Sen

    dBm

    -

    -

    -9.9 3
    Los Assert

    LosA

    dBm

    -26

    -

    -  
    Los De-Assert

    LosD

    dBm

    -

    -

    -12  
    Los Hysteresis

    LosH

    dB 0.5

    -

    -  

    Note:

    1. Coupled into 50/125 MMF.
    2. Measured with PRBS 231-1 test pattern @10.3125Gbps.BER=10E-12

    Recommended Host Board Power Supply Circuit

    34 (1)

                 Figure 1, Recommended Host Board Power Supply Circuit

    Recommended Interface Circuit

    34 (2) 

    Figure 2, Recommended Interface Circuit

    Pin arrangement

    34 (3) 

    Figure 3, Pin View

    Table 5-Pin Function

    Definitions

    Pin Symbol Name/Description Notes
    1 VEET Module Transmitter Ground 1
    2 TX_FAULT Module Transmitter Fault 2
    3 TX_DISABLE Transmitter Disable; Turns off transmitter laser output 3
    4 SDA 2-Wire Serial Interface Data Line (MOD-DEF2)  
    5 SCL 2-Wire Serial Interface Clock (MOD-DEF1)  
    6 MOD_ABS Module Absent, connected to VEET or VEER in the module 2
    7 RS0 Rate Select 0, optionally controls SFP+ module receiver  
    8 RX_LOS Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as NOT Signal Detect) 2
    9 RS1 Rate Select 1, optionally controls SFP+ module transmitter  
    10 VEER Module Receiver Ground 1
    11 VEER Module Receiver Ground 1
    12 RD- Receiver Inverted Data Output  
    13 RD+ Receiver Non-Inverted Data Output  
    14 VEER Module Receiver Ground 1
    15 VCCR Module Receiver 3.3 V Supply  
    16 VCCT Module Transmitter 3.3 V Supply  
    17 VEET Module Transmitter Ground 1
    18 TD+ Transmitter Non-Inverted Data Input  
    19 TD- Transmitter Inverted Data Input  
    20 VEET Module Transmitter Ground 1

    Note:

    1. The module ground pins are isolated from the module case.
    2. The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board.
    3. The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module.

    Monitoring Specification

    34 (4) 

    Figure 4, Memory Map

    Mechanical Design Diagram

    Unit:mm

    34 (5)

    Table 6- Cable

    Length

    Cable Length  LUnit: m TolerantUnit: cm
    ≤1.0 +5/-0
    1.0L≤4.5 +15/-0
    4.5L≤14.5 +30/-0
    >14.5 +2%/-0

    Warnings

    Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.

    Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.

     
  •  

    ◊ 10GBASE-SR at 10.31Gbps

    ◊ InfiniBand QDR, SDR, DDR

    ◊ Other optical links

previous page

next page

previous page

next page

Product consultation

Submit a message

*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible

Related products